 |
Modeling
The wax "model or mold" that is produced from the mill will also require your approval before casting. The wax should fit your finger just as it would if it were your ring. Once you are satisfied the casting will begin followed by using the traditional skills of the goldsmith or jeweler for proper finishing setting of the stones, and polishing of the piece.
 |
|
 |
| Two Tone with Emerald Cut |
[ view ] |
|
 |
| Titanium Carbon Fiber Band |
[ view ] |
|
|
|
 |

THE 2012 PORTLAND BRIDAL SHOW JUST 1 WEEK AHEAD Biggest NW Bridal Show will have place on January 7 and 8, 2012
[ more info ]

USE PAYPAL TO PAY YOUR DOWN PAYMENT FOR A CUSTOM JEWERY
[ more info ]
HAMILTON WATCHES NEW COLECTION !
[ more info ]
Read what others say about shopping experience with us
[ more info ]
|

Crystal and I went to five different jewelers. We even went through one jeweler that had gone as far as casting the rings, which were not even close to what we had drawn and described. We were so frustrated by the lack of professionalism and artistic ability in the trade we had almost given up. That all changed the minute we walked into Marx jewelers; immediately after talking with Slava at Marx Jewelers we had the instant feeling that he knew exactly what we were looking for. We dropped our last jeweler and trusted Slava and the staff at Marx Jewelers to create our design (losing $300 to the last jeweler). We were even more impressed when we received the digital rendition of what our rings would look like beforehand. Just as Slava had said the designs were exactly what we were looking for in the first place. The staff at Marx jewelers showed such professionalism, craftsmanship, and artistic touch the designs looked better than we could have imagined. Needless to say, our rings were perfect in every way and my wife and I could not be happier with the designs. Thanks Marx Jewelers! - Michael Weston, Oregon July 2007
[ more testimonials ]
|
|
 |